Home > Knowledge > Content
Detailed instructions for the use of plastic instrument seals and procedures
Jun 14, 2018

Sealing of plastic instruments is one of the most commonly used seals on the market. However, many users do not know how to use it when they first touch plastic seals. Here I will detail the use of plastic instrument seals:

博创详情页仪表封BC-M207jpg.jpg

1, cutting a length of their own need for the length of the seal line, for example, 15cm, 20cm, etc., can be used with plastic instrument seals used in the seal line with plastic coated steel wire, iron thread sealing line, colorful plastic coated wire and copper Lines, etc.

2, take out a plastic instrument seal, there are generally 3 holes: 2 on one side, 1 on the other side, will cut the length of the seal line from the bottom of the hole with 2 holes, that is, lead A hole in the bottom of the head is threaded in (note also that it passes through the hole in the leaf), then rotate one or two times;

3. At this time, the bottom has been fixed, and then pass the other line of the seal line through the two holes outside the object (such as the meter) that you want to seal, and then pass through the two holes in the seal, and then Rotate the blades at the top of the seal clockwise;

4. Rotate until you think you can lock it, stop spinning, then cut off the top blade;

5, complete seal

Products List